Avoid mistakes when choosing a new home: Nest choice and adoption of Leptothorax ant queens

In ants, mating and colony founding are critical steps in the life of ant queens. Outside of their nests, young queens are exposed to intense predation. Therefore, they are expected to have evolved behavior to accurately and quickly locate a nesting place. However, data on the early life history of female reproductives are still lacking. Leptothorax gredleri is a suitable model organism to study the behavior of young queens. Reproductives can be reared under artificial conditions and readily mate in the laboratory. After mating, L. gredleri queens have the options to found solitarily, seek adoption into another colony, or return into their natal nest. In this study, we investigated the decision-making processes of female sexuals before and after mating. In particular, we tested whether female sexuals use chemical cues to find their way back to the nest, studied if they prefer their own nest over other nesting sites and followed the adoption dynamics of mated queens over 8 weeks (plus hibernation and spring). We showed that female sexuals and freshly mated queens spent more time on substrate previously used by workers from their own colony and from another colony than on a blank substrate. This discriminatory capability of queens appears to be lost in old, reproductive queens. Nest choice experiments showed that female sexuals and freshly mated queens can distinguish their own nest while old mated queens’ do not. When reintroduced in their maternal colony, young queens were readily adopted, but a few weeks later aggression against young queens led to their emigration from the maternal nest and eventually also death.     

四川都江堰东方草鸮的繁殖记录

<正>东方草鸮(Tyto longimembris)隶属于鸮形目草鸮科,共有6个亚种的分化,我国分布的2个亚种为T.l.chinensis和T.l.pithecops。东方草鸮在我国主要分布于西南和华南(chinensis)以及台湾(pithecops),国外分布于印度次大陆、东南亚、菲律宾、新几内亚岛和澳大利亚(del Hoyo et al.1999,郑光美2011)。在《中国鸟类分类与分布名录》(第二版)中,东方草鸮的分布区并不包括四川省。实际上,早在2000年时就曾有报道称在四川省南充市高坪区发现草鸮的分布(胡锦矗2000),一直未能引起关注。有关东方草鸮繁殖生物学的资料,大多来自国外的     

Analyse des artefacts lithiques du site de Longgupo

Excavation has enabled recovery of 854 artifacts within 30 archaeological levels in the south sector and 11 in the north (chapter 3). These levels are quite probably contemporaneous, or even the same. The quantitative disparity in the number of strata between the two sectors is simply due to the fact that only the lower half of the northern zone was completely investigated. Similarly, the number of artifacts recovered by level varies according to the surface area excavated, although is some cases the density of material is significant despite the small area excavated, for example stratum C IV 5 which contains 174 lithic artifacts in 2 m². Before undertaking the technological analysis of the artifacts, given the preceding polemics provoked by the great age of this site and its implications for the spread of the first populations out of Africa, it was deemed important to carry out a plurifactorial analysis combining all of the data related to: the stratigraphy, taphonomic processes (post-depositional disturbance), analysis of natural processes that may have produced eoliths, experimentation and techno-functional analysis of the material. The stratigraphy shows clear interstratifications of fine and coarse fluviatile levels with often very clear particle size sorting of the coarse fraction. The archaeological material is typically found at the interface of these strata, either at the base of a clayey matrix, overlying a preceding coarse level, or in the superficial part of a sandy-clay deposit underlying coarse deposits. Post-depositional disturbance revealed during the new excavations in 2003–2006 cannot alone be the cause of eoliths. Excavation of a 6 m² zone in the modern river bed, located below the site, has demonstrated that the technological traits of eoliths recovered cannot in any way be confused with the technological traits of the artifacts recovered at the site itself. Similarly, viewed quantitatively, the 6 m² zone excavated in the river bed yielded around 20 eoliths while the 30 m² zone excavated at the site yielded 854 artifacts, one stratum alone yielding 184 artifacts in a 3 m² zone. During the experimental phase, adopting the same conditions of procuring raw material, from the same river bed, we very quickly realized the rarity of types of adequate volume that had been generally used at the site and the need to use certain operational processes to create such a form. In addition, the hardness and presence of several natural fracture planes in the Triassic limestone explain the choice of different operational processes and the very high number of knapping accidents, including those occurring during bipolar percussion. Although 90% of the raw material used was cobbles or broken blocks of local Triassic limestone, 10% of the tools were made on exogenous raw materials – siliceous or gravelly limestone, quartzitic sandstone, chert, volcanic rock – that are absent from the immediate environment of the site. These raw materials were brought to the site in the form of tools: worked cobbles, large retouched flakes, backed double-truncated flakes, a plaquette with a lateral bifacial edge, etc. The 854 artifacts have been classified into six object classes: worked cobbles with transversal edge (39%), worked cobbles with lateral edge (2%), unipolar flakes (27%), bipolar objects (half-blocks, half-cobbles including some flat “split” cobbles, “orange slices”, flakes and diverse fragments) (17%) and fragments resulting from knapping of blocks or cobbles (13%), hammerstone (2%). When the frequencies of these classes are calculated for each of the sectors, percentages are similar, indicating a high degree of homogeneity in the archaeological assemblages at the site. The situation is somewhat different when assemblages are compared within a single sector. Slight differences appear in the percentages of bipolar pieces and unipolar flakes. These differences seem to be random, like the frequency rate of knapping accidents in bipolar reduction, or economic, such as the choice of operational schemes to create worked cobbles based on the availability of suitable raw materials. The technological affinity between each of the archaeological assemblages tends to demonstrate great stability in technological knowledge through time. The class of worked cobbles is by far the most important and, apart from a few flakes produced intentionally, it appears to group all of the tools. To avoid placing these tools in a restrictive, semantically meaningless, class, we prefer the concept of matrix to the term worked cobble. A matrix is a structured arrangement of a series of technological traits, in a form as close as possible to that of the future tool. The matrix phase leads to the tool production phase, which may be unnecessary if the matrix phase includes fictionalization. In other words, the concept of matrix enables separating the phase of preparing a predetermined volume, such as a blade, Levallois flake or bifacial piece, from the tool production phase, consisting in creating the type of transformative edge intended, if necessary. The tool is thus an artifact of a specific form with an integrated edge and an operational scheme both specific to the function attributed to it and means of use associated with the form. Observed variability relates to: the size of the volume ranging from to 20, morphology, the form of the line formed by the edge which can in frontal view be curved, linear, sinuous or denticulated, and in transversal view curved, linear, sinuous or saw-toothed, and the length of the edge ranging from 1 to 10. Matrices with a simple bevel are distinguished from double bevels. In the framework of the technological analysis of production schemes to produce matrices with a simple bevel, a broad range of variability in production schemes can be observed, divided arbitrarily into two stages. The first stage consists in creating as closely as possibly the technological traits of the future matrix due to five general schemes. The first scheme (A) consists in selecting a cobble or block naturally possessing at least some of the technological traits needed. The missing traits are added by various preparations, including bipolar percussion 3 times out of 5. The second scheme (B) consists in knapping a flake from the block with some of the technological traits required for the matrix present on one of its surfaces. The third scheme (C) consists in the choice of a plaquette from which a bipolar shock creates the main traits of the matrix. The fourth scheme (D) consists in choosing a volume very similar to the intended matrix. The fifth and final scheme (E) consists in knapping a flake with technological traits very different from those intended. Depending on the distance between intention and realization, a second stage may be necessary. In general, this second stage perfects or creates the intended active edge, which is rarely obtained in the first stage. To produce a matrix with a double bevel, it is sometimes necessary to add an intermediate stage in order to prepare the second bevel. The first stage remains the same, with the use of the five operational schemes. By contrast, a clear difference exists in the percentages for the use of these schemes. For a matrix with a simple bevel, scheme A is dominant, followed by scheme D, while the situation is reversed for a matrix with a double bevel, where scheme D is dominant. Unipolar flakes, representing 27% of the assemblage, are produced in three different ways. The most important is flakes resulting from matrix production. The two others are flakes produced during different knapping schemes, some flakes in relation to the few cores present, other flakes in exogenous raw materials produced elsewhere and generally much larger. The other classes are dominated by bipolar products resulting essentially from knapping accidents. To summarize, these assemblages are characterized by: the search for tools differentiated by form and active edges; more than 90% of the tools made on two kinds of supports: a matrix with a simple bevel or a double bevel; matrices obtained using different operational schemes successively associating if necessary a knapping stage and a shaping stage. While the Triassic limestone is hard and thus imposes a strong constraint on knapping, the range of operational schemes appears to have been a “cultural” response diversified to this constraint and the presence of tools on exogenous raw materials. At the scale of China, comparison of this industry is impossible since it is the only site of this age and to contain so much material. The site of Majuangou, the only site of similar caliber, is younger by several hundred thousand years and is located several thousand kilometers to the north, making comparisons meaningless. We note only that most of the tool supports at Majuangou are knapped flakes. On an inter-continental scale, the comparison of sites of equal age is more promising. But lithic analyses are based on different methods, preventing comparison of similar data. However, if we make a simple summary of the data available, we can first say that in Africa, during these periods, different development technological stages were present and stages that are considered more evolved are manifestly less common using our approach. While these stages are more or less contemporaneous, which counters the idea of uniqueness, they would more surely be evidence of populations that were not in direct contact and had separate lines of development. In Asia, the Longgupo industry evidences a different technological option than that of contemporaneous populations in Africa. By contrast, when we take into account its developmental stage, we realize that this is an “evolved” stage in which the form of the support of the future tool is predominant. If we compare Africa and Asia in terms of stages, we are a priori at the same stage with different options being selected.     

Le gisement acheuléen de plein air de La Garde (Loire). Remarques sur une série lithique acheuléenne entre Rhône et Loire

The lithic assemblage of La Garde offers the opportunity to observe a Final Acheulean series located in the Loire department (south-east France). The site was probably a multi-activity place asking large tools and flakes, according to the strategies used by humans. Three main categories of large bifacial tools mainly made of flint can be described, with a triangular or oval shape and with a transversal cutting edge. These tools are more bifacial-tools than bifaces through the kind of shaping and the retouches on the cutting edges. The Levallois flaking is associated to various other types of knapping. The site, located along a small valley, suggests a human circulating between the Saône-Rhône corridor and the interior basins of the Massif Central Mountains. The Rhodanian corridor yielded little evidence of Acheulean settlements while in the Centre of France, they are numerous. La Garde proves that systematic prospecting in this area will permit in future to complete the map of the Acheulean occupations in south-east France.     

白木香种子脱水耐性的发育变化及贮藏特性

研究白木香种子发育进程中种子性状、萌发能力和脱水耐性的变化,以及不同光温条件对种子萌发的影响和种子的贮藏特性。结果表明：白木香种子在花后78d获得最大干重,进入生理成熟期,此时萌发率接近最大值;胚在花后57～85d,脱水耐性逐渐增强,并在花后85d获得最大脱水耐性。种子萌发的适宜温度范围为25℃-35℃,光照对种子萌发有一定的抑制作用。新鲜自木香种子（含水量27．45％）在4℃低温条件下贮藏1个月后萌发率仅为30％左右,而含水量7．38％的干燥种子在4℃低温条件下贮藏120d,萌发率仍有53．33％,因此,4℃低温和适度脱水有利于种子短期贮藏。白木香种子能忍耐一定程度的脱水,但干燥至含水量7．50％以下时种子会发生损伤,因此推测白木香种子是一种中间性种子。     

CST-II’s recognition domain for acceptor substrates in α-(2→8)-sialylations

CST-II is a bacterial sialyltransferase known for its ability to perform α-(2→8)-sialylations using GM₃ related trisaccharide substrates. Previously, we probed the enzyme’s substrate specificity and developed an efficient synthesis for α-(2→8)-oligosialosides, and we suggested that CST-II could have a very small substrate recognition domain. Here we report our full studies on CST-II’s recognition feature for acceptor substrates. The current study further demonstrates the versatility of CST-II in preparing complex oligosaccharides that contain α-(2→8)-oligosialyl moieties.     

急性冠脉事件发病特点及院前急救对策

目的分析我院急诊科对急性冠脉事件包括急性心肌梗死（AMI）和不稳定型心绞痛（UAP）的院前急救情况,就其存在的问题提出对策。方法回顾性分析1989～2010年救治的急性冠脉事件患者166例临床资料,其中AMI患者72例,UAP患者94例。结果急性冠脉事件发生率占急性心脏事件的48．8％,其院前急救率为31．3％（52／166）,院前抢救成功率为82．69％（44／52）。结论（1）急性冠脉事件的院前急救率仍低,主要与患者及其家属不了解急性冠脉综合征的发病先兆和表现等相关知识以及呼救意识有关,因此加强相关知识的群众性普及教育迫在眉睫。（2）缩短出诊半径、加强医务人员对急诊处理特别是院前处理急性冠脉事件知识的培训、完善院前急救设备,是提高急性冠脉事件院前抢救成功率的保障。     

影响侧脑室脑膜瘤手术疗效的多因素分析

目的：探讨影响侧脑室脑膜瘤手术疗效的因素,从而更好的促进侧脑室脑膜瘤的手术治疗。方法：回顾性分析侧脑室脑膜瘤显微手术30例的临床病理特征与顸后情况,其中KPS〉70分表示为预后良好,KP懿70分表示为预后不良。对各性别、年龄、部位、肿瘤大小、病理分型及术后有无并发症因素与预后进行χ^2检验与用Logistic回归分析其影响因素。结果：单因素分析表明肿瘤部位、病理分型及术后有无并发症对侧脑室脑膜瘤的预后有明显影响,P〈0．05,差异有统计学意义。经Logistic回归分析,最终进入模型的影响因素有2个,它们分别是肿瘤部位和术后有无并发症,其P值均小于0．05。结论：在显微手术下,侧脑室脑膜瘤大部分可以全切并取得了较好的远期疗效。肿瘤部位和术后有无并发症是影响预后的一个重要因素,及时处理并发症能显著地改善预后。     

Characteristics of asymptomatic patients with SARS-CoV-2 infection in Jinan,China

Coronavirus Disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2(SARS-CoV-2) is continuously and rapidly circulating at present. Asymptomatic patients have been proven to be contagious and thus pose a significant infection control challenge. Here we describe the characteristics of asymptomatic patients with SARS-CoV-2 infection in Jinan, Shandong province, China. A total of 47 patients with confirmed COVID-19 were recruited. Among them, 11 patients were categorized as asymptomatic cases. We found that the asymptomatic patients in Jinan were relatively young and were mainly clustered cases. The laboratory indicators and lung lesion on chest CT were mild. No special factors were found accounting for the presence or absence of symptoms. The presence of asymptomatic patients increased the difficulty of screening. It is necessary to strengthen the identification of such patients in the future.     

Site-saturation mutagenesis of proline 176 in Cyclodextrin Glucosyltransferase from Bacillus sp. Y112 effects product specificity and enzymatic properties

Based on the analysis of amino acid sequence and simulated structure, saturation mutagenesis was performed to explore the role of the site p176 of cyclodextrin glucosytransferase (CGTase) from Bacillus sp. Y112. Compared to the wild-type, mutant P176G showed 10.4 % improvement in conversion from starch to cyclodextrins (CDs), whose β-CD yield increased by 6% and α-CD yield decreased by 8%. Mutants P176L and P176I were increased by 7.9 % and 9.4 % on CDs production, indicating replacement of hydrophobic amino acids significantly improved in cyclization activity. Kinetics studies indicated the substrate affinity of P176G and P176K were increase by 13 % and 14 %, and the catalytic efficiency of P176K was increase by 14 %. In addition, the optimal temperature of mutants transformed from 50℃ to 40℃ and the optimal pH shifted from 10.0 to 8.0. These results indicate that the site P176 plays a critical role in catalytic activity, product specificity and enzymatic properties of CGTase.